Festool Domino DF 500 Q Joiner Set

Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.

$1,040.00 (as of November 17, 2018, 7:40 pm)

Usually ships in 24 hours

Description

Festool Domino 574308 DF 500 Joining System Set – Domino with Trim & Cross Stops replaces 574283SKU FES-574308
Built to make mortise and tenon joinery simple and accessible, the Festool Domino Joiner DF 500 Q Set delivers flawless mortises every single time. Featuring Festool’s patented cutting method, a broad range of indexing features, and adjustable mortise sizing, the Domino makes it easy to get accurate, easy-to-reproduce results. Plus, the joiner is ready for use with a dust-extraction system, which allows for cleaner work and longer tool life.

c26-B002UJOKD2-call1 Festool Domino DF 500 Q Joiner Set
Domino Joiner
At a Glance:
  • Works with prefabricated Domino tenons to make joinery simple
  • Makes it easy to keep an eye on mortise depth and width
  • Seven-stepped height adjustment for use with a lot of materials
  • Creates angled mortises; offers positive stops at 0, 22-1/2, 45, 67-1/2, and 90 degrees
  • Ensures ready-to-glue surfaces and clean air when used with a dust extractor
  • Set includes trim stop for narrow materials and cross stop for repeat hole spacing
c26-B002UJOKD2-call3 Festool Domino DF 500 Q Joiner Set
c26-B003ASEP14-1-s Festool Domino DF 500 Q Joiner SetWidth, depth, fence, and steps
are all adjustable for precise alignment. View larger.
c26-B003ASEP14-2-s Festool Domino DF 500 Q Joiner SetQuick and easy mortise size adjustment. View larger.
c26-B003ASEP14-3 Festool Domino DF 500 Q Joiner SetCarbide-tipped spiral bit lasts up to 14,000 joints.
c26-B003ASEP14-4 Festool Domino DF 500 Q Joiner SetFive mortising depths.
c26-B003ASEP14-5 Festool Domino DF 500 Q Joiner SetPivoting fence.

In addition to the standard joiner setup, this set includes a trim stop for use with narrow materials (between 7/8-inch and 2-3/4 inches wide) and a cross stop, which allows for accurate, repeat-hole spacing between 3-7/8 inches and 8-1/16 inches.

Spiral Cutter and Carbide Bit for Flawless Mortises
Festool’s patented routing principle is at work in the 420-watt Domino DF 500 Q’s spiral cutter, which rotates and oscillates as it works that will help you create flawless mortises. Thanks to a spiral bit that features a durable carbide tip, you’ll be able to consider the Domino to cut cleanly and quickly. Plus, each bit can be used in the creation of 5,000 to 14,000 joints, depending on what materials you work with most regularly, so you would not have to worry about frequent bit replacements.

Equally important in creating sturdy, long-lived joints are the prefabricated beech and sipo Domino tenons that are designed for use with this system (not included). These tenons offer large gluing areas for improved joint strength, plus they’re 100-percent rotation proof and sturdier then either dowels or biscuits.

Since comfortable handling also contributes to accuracy, the Domino is easy to grip and weighs in at just 7 pounds.

Adjustable Mortise Sizing for Versatility
Precise mortise placement and spacing depends on being able to execute acute tool adjustments, and the Domino makes these adjustments easy. It offers the ability to adjust the width of each mortise, which makes it easier to achieve perfect alignment when joining panels. And with the ability to quickly and easily select from five different mortising depths, you’ll be able to adapt the spiral cutter for use in a range of applications.

Plus, Festool’s Rapid Bit Change design means that you can change a bit in less than 30 seconds, which means that switching to a new desired tenon size never slows your work down.

Sturdy Fence Offers Height and Angle Adjustment
In addition, the Domino is design to permit fast, easy fence height adjustments. It provides seven different height-step positions, which allows for use with a wide range of different materials in quite a lot of thickness.

Also, the pivoting fence allows for the creation of perfect angled mortises at angles ranging from 0 to 90 degrees. For easily repeatable results, it features positive stops at the most commonly used 0, 22-1/2, 45, 67-1/2, and 90-degree angles.

Optional Dust Extraction for Cleaner Finishes
Designed to allow use with a dust extractor, the Domino can be counted on to effectively direct debris away from you and your work area, which translates to a healthier work environment, and mortises that are clean and ready for glue. In addition, proper dust extraction greatly extends cutter life, saving you money and the hassle of replacement.

The Festool Domino Joiner DF 500 Q Set is backed by a three-year limited warranty and a 30-day money-back guarantee

What’s in the Box
Festool Domino DF 500 Joiner, Domino cutter D5, Plug-it power cord, improve bracket, trim stop, cross stop, wrench, and Systainer storage container.


c26-B003ASEP14-6 Festool Domino DF 500 Q Joiner SetSeven-step height adjustment for use with a lot of hard and soft woods.



Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
Pivoting Fence means that you can create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
Indexing pins for quick alignment against the edge of the workpiece for accurate placement.
Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life.

Additional information

Brand

Label

Manufacturer

ProductGroup

Warranty

Reviews

There are no reviews yet.

Be the first to review “Festool Domino DF 500 Q Joiner Set”

Your email address will not be published. Required fields are marked *